Pendidikan Kejuruan di Era Industri 4.0: Tantangan dan Peluang Karier

  • Maysitoh Maysitoh 
    Universitas Negeri Padang
    Indonesia
  • Desri Fitri Agung
    Universitas Negeri Padan
  • Afdal Afdal
    Universitas Negeri Padang
    Indonesia

Abstract

Pendidikan kejuruan adalah salah satu sarana yang pengembangan ketrampilan siswa agar siap kerja. Perubahan dunia saat ini yang juga tengah memasuki era revolusi industri 4.0 semakin memberikan tantangan bagi individu untuk mampu menunjukkan eksistensinya pada era ini. Konseling karier yang terintegritas dengan pendidikan memegang kontribusi penting dalam membantu individu dalam hal ini. Adanya konseling karir dinilai menjadikan individu lebih matang dalam merencanakan karier dan meminimalisir stress kerja.Tulisan ini bertujuan memaparkan tantangan serta peluang karier pada pendidikan kejuruan di era industri 4.0. Kajian ini menggunakan metode kepustakaan (library research), sedangkan  pengumpulan data dilakukan dengan menelaah dan/atau mengekplorasi beberapa jurnal, buku, hasil penelitian, dan dokumen-dokumen (baik yang berbentuk cetak maupun elektronik) serta sumber-sumber data dan atau informasi lainnya yang dianggap relevan dengan kajian.

Keywords
  • Pendidikan Kejuruan
  • Indusri 4.0
  • tantangan
  • Peluang
  • karier
References
  1. ABKIN. (2013). Panduan Umum Pelayanan Bimbingan Dan Konseling Pada Satuan Pendidikan Dasar Dan Menengah (SD/MI/SDLB, SMP/MTs/SMPLB, SMA/MA/SMALB dan SMK/MAK.
  2. Ardana, I. N. S., Dharsana, I. K., & Suranata, K. (2014). Modeling Untuk Meningkatkan Kematangan Karir Siswa Kelas X Tkj 1 Smk Negeri 3 Singaraja. E-Journal Undiksa Jurusan Bimbingan Dan Konseling, 2 No 1.
  3. Benesova, A., Hirman, M., Steiner, F., & Tupa, J. (2018). Analysis of Education Requirements for Electronics Manufacturing within Concept Industry 4.0. In Proceedings of the International Spring Seminar on Electronics Technology (Vol. 2018–May). https://doi.org/10.1109/ISSE.2018.8443681
  4. Blanco, E., Schirmbeck, F., & Costa, C. (2019). Vocational Education for the Industrial Revolution. Springer International Publishing. https://doi.org/10.1007/978-3-319-95678-7
  5. Divayana, D. G. H., Suyasa, P. W. A., Ariawan, I. P. W., Mahendra, I. W. E., & Sugiharni, G. A. D. (2019). The Design of Digital Book Content for Assessment and Evaluation Courses by Adopting Superitem Concept Based on Kvisoft Flipbook Maker in era of Industry 4.0. In Journal of Physics: Conference Series (Vol. 1165). https://doi.org/10.1088/1742-6596/1165/1/012020
  6. Helaludin, H. W. (2019). Pengembangan Kompetensi Pendidik di Perguruan Tinggi dalam Menyongsong Revolusi Indutri 4.0. Ekspolrasi Sumberdaya Alam Hayati Indonesia Berbasis Entreprnership Di Era Revolusi Industri 4.0, 413–418.
  7. Hendradi, P., Khanapi, M., & Mahfuzah, S. N. (2019). Cloud computing-based e-learning system architecture in education 4.0. In Journal of Physics: Conference Series (Vol. 1196). https://doi.org/10.1088/1742-6596/1196/1/012038
  8. Kashyap, A., & Agrawal, R. (2019). Academia a new knowledge supplier to the industry! Uncovering barriers in the process. Journal of Advances in Management Research. https://doi.org/10.1108/JAMR-02-2019-0017
  9. Kaswan. (2014). Career Development. Bandung: Alfabeta.
  10. Kazimirov, A. N. (2018). Education at University and Industry 4 . 0. 2018 Global Smart Industry Conference (GloSIC), 1–6.
  11. Kumar, K., Zindani, D., & Davim, J. P. (2019). Process Planning in Era 4.0. SpringerBriefs in Applied Sciences and Technology. https://doi.org/10.1007/978-981-13-8165-2_2
  12. Lau, L. J. (2003). The future of career counseling as an instrument of public policy. China Public Finance and Taxation Forum 2003, 22(4), 22. Retrieved from http://web.stanford.edu/~ljlau/Presentations/Presentations/031115.pdf
  13. Lieu Tran, T. B., Törngren, M., Nguyen, H. D., Paulen, R., Gleason, N. W., & Duong, T. H. (2019). Trends in preparing cyber-physical systems engineers. Cyber-Physical Systems, 5(2), 65–91. https://doi.org/10.1080/23335777.2019.1600034
  14. Mourtzis, D., Vasilakopoulos, A., Zervas, E., & Boli, N. (2019). Manufacturing System Design using Simulation in Metal Industry towards Education 4.0. In Procedia Manufacturing (Vol. 31, pp. 155–161). https://doi.org/10.1016/j.promfg.2019.03.024
  15. Rahman, F., & Fitria, F. (2018). Digital Disruption in Students Behavioral Learning; Towards Industrial Revolution 4.0. Teknik Informatika Politeknik Hasnur, 04(2), 9–20.
  16. Reddy, L. (2017). Envisioning Education 4.0. Industry Week; Cleveland, (10), 2017–2019.
  17. Scott, E. (2018). 4 Ways to Transform Your People Strategy for Industry 4 . 0, 1–5.
  18. Setya Marsudi, A., & Widjaja, Y. (2019). Industri 4.0 Dan Dampaknya Terhadap Financial Technology Serta Kesiapan Tenaga Kerja Di Indonesia. Ikraith Ekonomika, 2(2), 1–10.
  19. Statistik, B. pusat. (2018). Statistik, (42), 1–16. https://doi.org/No. 74/11/35/Th.XVI, 5 November 2018
  20. Supriatna, B. (2009). Bimbingan karier di smk. https://doi.org/10.1007/s00228-004-0767-7
  21. Umeda, Y., Ota, J., Kojima, F., Saito, M., Matsuzawa, H., Sukekawa, T., … Shirafuji, S. (2019). Development of an education program for digital manufacturing system engineers based on “Digital Triplet” concept. In Procedia Manufacturing (Vol. 31, pp. 363–369). https://doi.org/10.1016/j.promfg.2019.03.057
  22. Verner, I., Cuperman, D., Romm, T., Reitman, M., Chong, S. K., & Gong, Z. (2020). Intelligent Robotics in High School: An Educational Paradigm for the Industry 4.0 Era. Advances in Intelligent Systems and Computing. https://doi.org/10.1007/978-3-030-11932-4_76
  23. Winanti, Gaol, F. L., Napitupulu, T. A., Soeparno, H., & Trisetyarso, A. (2019). Learning Framework in the Industrial Age 4.0 in Higher Education. In 1st 2018 Indonesian Association for Pattern Recognition International Conference, INAPR 2018 - Proceedings (pp. 227–232). https://doi.org/10.1109/INAPR.2018.8627039
  24. Yahya, M. (2018). Era Industri 4.0: Tantangan Dan Peluang Perkembangan Pendidikan Kejuruan Indonesia. Pidato Pengukuhan Penerimaan Jabatan Professor. https://doi.org/10.1080/15298868.2011.636509

Downloads

PDF

Statistic

Abstract Views
: 4481 times
PDF
: 10 times